Home   Home  
About Us
Our Mission
Products
Clientele
Contact Us
Enquiry Form
 
Continuously Transposed Cables
Fibre Glass Covered
Enamelled
Wrapped
Speciality Products
 
 
 
 
  Enamelled Rectangular Copper/Aluminium Magnet Winding Wire
Typical Applications
   
 -  Electric Motors & Generators
 -  Transformers
 -  Electro-Magnets
 -  Transformers
 -  Starter Motors
 -  Hermetic Motors
 -  AC Coils
 -  DC Coils

Reference Specifications
- IEC, DIN, IS, other relevant National/ International/Customized standards

Insulation Options
- Polyvinyl Acetal Enamel (105 0C)
- Polyester Enamel (Class F - 155 0C)
- Polyesterimide (Class H - 180 0C)
- Dual Coated Polyester (imide)+Polyamideimide (Overcoat)
  (Class C-200 0C)

Enamel Increase in Dimensions
- Grade 1: Maximum 0.11 mm
- Grade 2: Maximum 0.16 mm

Vertical Enamelling line with in-line anneling
 
Size Range
  Minimum Maximum
Width 0.8 mm (0.031 in) 8 mm (0.315 in)
Thickness 4 mm (0.157 in) 10 mm (0.394 in)
Cross Section Area 3.2 sq.mm 80 sq.mm
Test Requirements:
- Mechanical Properties
- Electrical Properties
- Thermal Properties
- Chemical Properties
 
 
Technical Data
Temperature Index 155 180 200
Characteristic of Enamelled Wire For Mechanical Stress For Increased Heat Stress For Increased Thermal & Mechanical Stress
Pencil Hardness (Solvent Resistance) 3H 3H 5H
Edgewise Bend 3xWidth - OK 3xWidth - OK 3xWidth - OK
Breakdown Voltage at elevated temperature 75% at 155 Deg.C 75% at 180 Deg.C 75% at 200 Deg.C
Heat shock of Bent Strip 4xWidth at 180 Deg.C 4xWidth at 200 Deg.C 4xWidth at 220 Deg.C
 
   Nominal Cross Sectional areas of preffered sizes Download
 
Packaging Details
No. Flange Dia.
D1(mm)		 Traverse width
B2(mm)		 Barrel Dia.
D2(mm)		 Flange Thickness
T(mm)		 Overall width
B1(mm)		 Bore Dia.
D3(mm)		 Capacity in Kgs.
1 355+-5 200+-3 300+-5 28 +- 4 200 40 50
2 450+-5 200+-3 300+-5 28 +- 4 267 40 70
3 560+-5 220+-3 400+-5 28 +- 4 289 40 100
4 710+-5 240+-3 460+-5 28 +- 4 322 40 250